Application of Trough Mixer in Pharmaceutical Industry

Release time:

2024-07-04

Trough mixer is widely used in pharmaceutical, food, chemical, electronics and other industries of material mixing. It is especially suitable for mixing materials with high uniformity requirements and large material specific gravity difference.

The mixing barrel participates in the swing while driving, so that the material in the barrel can be fully mixed. The discharge port of the mixing barrel deviates from the center line of the cylinder part of the mixing barrel, so that the machine has the characteristics of rapid mixing, large mixing volume, convenient discharge and so on.

The trough mixer is used to mix powdery or pasty materials to mix different materials evenly. It is horizontal groove-shaped single paddle mixing, stirring paddle is through shaft type, easy to clean. The contact with the object is made of stainless steel, which has good corrosion resistance, and the mixing tank can automatically turn over the material.

Tank mixer is a new product. It is a new type of mixing and mixing equipment independently developed by technicians on the basis of absorbing advanced technology at home and abroad. With its excellent structure, reasonable design concept and fine processing technology, it is widely used in the mixing, mixing, drying and coloring of various materials in plastics, rubber, pharmaceutical, dye, food, daily chemical industry and other industries.

The trough mixer is a horizontal trough-shaped single-slurry mixer, which is used to mix paste-like materials in the pharmaceutical industry to make different materials evenly mixed, and does not cause dissolution, volatilization or deterioration of materials during the mixing process. Before use, an idle running test should be carried out. Before the test run, the firmness of all connectors of the machine, the amount of lubricating oil in the reducer and the integrity of electrical equipment should be checked. Then, the main switch should be closed and the power supply should be connected to carry out the idle running test.

Experts remind: managers are familiar with the technical performance, internal structure, control structure of the use of the principle. Do not leave the work site during operation to prevent damage to the parts due to failure, and ensure production.

Latest News